Knowledgebase
RSS Feed
Knowledgebase : Support > Hosted PBX > Q&As
     
The timeout setting is the ringtime in seconds. After this time the current destination will stop ringing.
You can configure IVR to do that. Navigate to IVR, set 'Remote access: Voicemail'. Then, when you enter number that you configured in IVR, you will be asked for extension number and PIN. After that you will be able to check your voicemail and change voice...
By default Extension 700 is used to park calls. While in a conversation, press '#' to initiate a transfer, then dial '700' (e.g. '#700'). You will hear a voice telling you the Extension call was parked at (most probably '701' or '702'). Now hang up. The ...
Create 'English' IVRClick on 'Add IVR' buttonSet IVR 'Name'='English'Set IVR 'Number'='1000' for exampleSelect 'Greeting' file with the instructions on English languageSet option '1'='1001' (1001 will be used for 'French' IVR) Set other IVR options per yo...
CONFIGURATION OF OPERATIONAL HOURS To configure the operational hours on the Orbtalk PBX, firstly, you will need to edit a DID, this can be done by loging into your Orbtalk PBX with the details provided via email when you signed up for the Orbtalk Hos...
AMENDING VOICEMAIL MESSAGES You can change your personal voicemail using a registered handset to the Orbtalk PBX system. To change the outgoing message of an extension you are using, dial *123 from your handset. This takes you to your personal voice...
© Orbtalk Ltd 2015